ATX 12V 2.3 & EPS 12V 2.91 - 1500W - Active PFC - Embebedded Socket and Modularized Cable Management - Quad-SLI Compatible - NEW 8-pin PCI Connector
Thermaltake - ATX 12V 2.3 & 12V EPS 2.91 - Cable Management - 14 cm Fan - ToughPower 1500W - W0171
Features :
- Intel ATX 12V 2.3 and EPS 2.91 compatible
- Stable 1500W continuous output, peak power at 1600W (at 50) operating environment)
- Four 8pin and four 6pin PCI-E connectors design supports multiple high-end graphic card setup
- Support Dual core CPU, Quad core CPU, NVIDIA SLI and all Multi-Core GPU Technology
- Four independent +12V rails provides superior performance (Total Combined load of +12V is 120A)
- Modularized Cable Management to eliminate clutter and improve airflow inside the case.
- Active Power Factor Correction (PF>0.99) and high efficiency (up to 87%).
- Industrial grade components (capacitor, transformer, etc)
- High reliability: MTBF>120,000 hours
- Quiet and reliable 14cm ball-bearing fan.
- Protections: Over Current, Over Voltage, Under Voltage, Over Temperature,
- Over Power, and Short-Circuit protection.
- Safety / EMI Approvals: CE, CB, TUV, FCC, UL, CUL, and BSMI certified.
Connectors:
 |
20+4-pin Main
Connector X 1
4+4 pin power
connector X 1
8-pin power
connector X 1 |
 |
4-pin Peripheral
Connector X 8
Floppy
Connector X 2 |
 |
|
 |
5-pin S-ATA
Connector X 8 |
 |
8-pin PCI-E
Connector X 4 |
|
|
 |
6-pin PCI-E
Connector x4 |
Performance:
|
Model |
W0171 |
|
Power |
1500W |
|
Dimension |
200mm(L)x150mm(W)x86mm(H) |
|
Switches |
ATX Logic on-off additional power rocker switch |
|
PFC |
Active PFC (PF > 0.9) |
|
Cooling System |
140mm Fan, 2300RPM ± 10% |
|
Noise |
16 dBA at 1300 RPM |
|
P. G. Signal |
100-500 ms |
|
Efficiency |
up to 87% |
|
Hold-up Time |
16ms |
|
INPUT |
|
Input Voltage |
230 Vac |
|
Input Frequency Range |
47 ~ 63 Hz |
|
MTBF |
120,000 hrs minimum (at 25°) |
|
Input Current |
10A |
|
OUTPUT |
|
Voltage |
+12V1 |
+12V4 |
+3.3V |
+12V2 |
+12V3 |
+5V |
-12V |
+5Vsb |
|
Max load |
20A |
40A |
30A |
20A |
40A |
30A |
0.8A |
3.5A |
|
Min load |
1A |
1A |
0.5A |
1A |
1A |
0.5A |
0A |
0A |
|
Ripple & Noise |
240mV |
240mV |
100mV |
240mV |
240mV |
100mV |
240mV |
100mV |
|
Regulation |
+3,-3% |
+3,-3% |
+3,-3% |
+3,-3% |
+3,-3% |
+3,-3% |
+10,-10% |
+3,-5% |
|
Max output power |
750W |
750W |
9.6W |
17.5W |
|
Total power |
1500W |
|
Peak Power |
1600W |
|
* Add 0.1uF and 47uF capacitors across output terminal during ripple & noise test. |
|
