|
|
|
|
 |
Cooling Kit - Sunbeam - "Overclock Cooler Kit" - Silver
This system allows you to bring FRESH AIR DIRECTLY to your CPU Cooling System
Any CPU Cooler, even the best ones, usualy pushes the inside case air to the CPU Cooler. Even if your tower as a good air cooling system (in and out), this inside air temperature is still higher that the one witch is outside the case.
Thanks to the iso-thermal provided tube, you'll then be able to send fresh air directly to your CPU Cooler.
Moreover, a PSU exhaust Chimney is also provided in the kit !!!.
This will prevent out of the PSU warm air to be immediatly intaked by a nearby fan...
AS A RESULT : More efficient cooling without increasing noise !!!
Here are two mouting examples (a third one is also possible, connecting to the top fan after reversing it) :
 
Please do take note of these important points:
1 - Please carefully control the airflow direction of the concerned fans. It is indeed necessary that the two fans, that are mounted at each end of the tube, BLOW IN TEH SAME DIRECTION. (Avoiding this may have desastrous consequences to your system)
2 - In the case you decide to use an existing case fan, please do verify that you still have a case cooling solution to bring fresh air to oher than CPU components (Hard Disks, Chipset, Graphic Card...)
3 - The fan that is mounted on the tube at the opposit end of the CPU Cooler fan has to be positionned at a distance and in such a way that it wil be compliant with your case and the included expandable tube. In case you intend to install in a perpendicular position or in a too close position, it may happend that the kit installation is impossible. (depending on your CPU Cooler high, motherboard and case design). The recommended installation is the one that consist in using a case front panel fan to intake air into the tube.
4 - pc-look.com informs its customers that, considering the particular nature of this product, pc-look.com will not be able to accept it back for refound, neither exchange
Kit Compliancy and Specifications :
- CPU Fan: 70x70 or 80x80 mm
- Case Fan: 80x80 mm
- Tube Diameter: 80 mm
- Longueur Lenght (deployed): 50 cm
- Dust Filter: Included for 80x80 mm fan (+ 4 mounting screws)
Click here to discover more images of this product
|
|
  |
|
|
| | |
|
|
|
|
