|
|
|
|
 |
PC-LOOK PRESENTS THE "RHEOBUS III SILVER - 3 PINS"
The NEWPower Regulator for your fans and lights.
Two Colors LEDs ==> Red (low voltage) and Blue (high voltage)
You can now COMPLETLY STOP a connected peripheral by cutting the power on a specific channel ==> Each button has a "ON/OFF clic"
TOTAL CONTROL ==> from 0 volt (power cut) to 12 volts
Aluminium Front Face
Still very Powerfull : Supports 20 Watts per Channel
Installation is very easy. No more need to drill anything : The New Rheobus III has its own BLACK Front Face and takes place very easy in a free 5"1/4 bay.
Anyone who has added 4 fans to their case quickly realizes that while their case is certainly cooler, they have added one negative element: Noise. The wind noise generated by the fans can become quite aggravating over time. There is an easy solution. Run the fans at full speed when you are doing CPU intensive tasks, and then when your system is idle run the fans at a slower setting.
On an other hand, if you installed some light in your box, you may want it to glow just enough depending on the external environment or simply on your mood...
Some small systems can offer you to do so, but only with very low power demand on each power channel... Usualy, something bigger and more powerful is needed.
The Rheobus III, allowing 20 watt on each channel, is the device that outshines the rest, quite literally, with 4 UltraBrite Two Colors LEDs (color depends on the voltage delivered to the related controlled peripheral), as well as Aluminium Knobs and high quality rheostats. While turning a Rheobus knob, you change the tension on the related channel. Thus you can regulate the brightness of the light generated by your Cold Cathode, you can also adjust the speed of your fans to whatever speed you prefer, making it perfect for reducing noise. So, instead of leaving your 4 fans on all the time, you can instead turn down two and run the two others at a higher speed, cutting down on the noise immensely.
In order to ensure that you can easyly connect your peripherals to Rheobus III, the product provides four 3 pins Male Molex connectors on witch you simply plug any Female 3 pins Molex peripheral (such as most of the fans...).
ENHANCE THE RHEOBUS:
The Two Colors LEDs are socketed, so you can change some or all of them.
You also can decide to get new colored knobs to adapt, for example, the color of it to the color of the light they command.
You can get extra knobs in black, blue, red, green, gold, purple. (Please see our section Cases / Accessories)
It's that easy with Rheobus III !
SPECIFICATIONS:
4 Ultra Luminescent Two Colors LEDs (RED and BLUE).
4 Aluminium Knobs (Black Color)
Ability to handle very large fans
Ability to handle multiple fans
Ability to handle Cold Cathodes and Electro Luminescent Cables (neon String)
Rated for fans up to 20 watts per switch
Socketed LEDs to allow color change
Extra large heatsinks
Unit comes with a 4 pins Molex splitter, and "adds its own connection" in your case
1x Dimensions: L x D x H : 149 mm x 92 mm (plus 15 to 20 mm for the Molex plug) x 42 mm
1x 3 pins Molex Extension - M(3p)/F(3p) - 60 cm
2x Molex adapter - F(3p)/M(3p)
|
|
  |
|
|
| | |
|
|
|
|
